Installation Guide

1. Measure and cut the profile to desired length
2. If required, fix tile to riser
3. Bed the profile into the adhesive ensuring the adhesive penetrates through the anchoring holes. Adjust accordingly and position the profile so the front edge covers the tile on the riser if fitted.
4. Ensure the steps are dry, clean, free of debris, level and even.
5. If Predrilled use the drill holes to mark steps for drilling location.
6. Drill and Plug the steps.
7. Apply suitable adhesive to the underside of the nosing and apply nosing to the step.
8. Screw down the step with the appropriate size screws.
9. Apply insert (if separate) or insert pip to cover the screw head.